Eusso UGL2430-UHM Bedienungsanleitung

Wireless-N 4-Port Router UGL2430-RTH User’s Manual Copyright EUSSO Technologies, Inc. All rights reserved.

9 b) Click “Properties”, the window below will appear and then click “IP Address” tab, ‧ If you decide to use DHCP, select “Obtain an IP address au

10restart your system, Wireless Router will obtain an IP address for this system. ‧ If you decide to use fixed IP address for your system, select “S

11 Checking TCI/IP Setting for Windows NT4.0 a) Select “Control Panel Æ Network”, window below will appear, click “Protocols” tab then select “TCP/I

12 ‧ Select the network card on your system from “Adapter” field. ‧ If you decide to use IP address from Wireless Router, select “Obtain an IP addr

13 Checking TCP/IP Settings for Windows 2000 a) Select “Start Æ Control Panel Æ Network and Dial-up Connection” and right click “Local Area Connecti

14b) Select the “Internet Protocol (TCP/IP)” for the network card on your system, then click “Properties”, window below will appear. ‧ If you decid

15 b) Select “Internet Protocol (TCP/IP)” then click “Properties”, window below will appear.

16 ‧ If you decide to use IP address from Wireless Router, select “Obtain an IP address automatically”. ‧ If you decide to use the IP address you a

17 ‧ If you decide to use IP address from Wireless Router, select “Obtain an IP address automatically”. ‧ If you decide to use the IP address you a

18 Configure IP address Automatically: b) Select “Obtain an IP address automatically” and “Obtain DNS server address automatically” Click “OK” to f

1FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

19Configure IP Address Manually: c) Select “Use the following IP address” and “Use the following DNS server addresses”. IP address: Fill in IP

20You can use ping command under DOS prompt to check if you have setup TCP/IP protocol correctly and if your computer has successfully connected to t

21Step1: Enter Wireless Router’s default IP address as http://192.168.1.1 in the Address field then press Enter. Step2: Login dialog box will ap

22 3.2 Wireless Configure your wireless connection, security, and other advanced parameters. 3.2.1 General This page allows user to configure bas

23 SSID: Assign an identification string of up to 32 characters for your wireless connection. Hide SSID: If [YES] is selected, your SSID does not sh

24802.11g traffic automatically in the presence of 11b traffic. Authentication Method: This field enables the authentication methods for wireless cli

25authentication of Open system, Share key, WPA-Personal, WPA2-Personal. Not support WPA-Enterprise, WPA2-Enterprise and Radius. Default is Disable.

26(2) To ensure the connection, please set the same channel and security method between different APs. (3) To bridge different model and router, the

27reduces the range at which clients can connect to the repeater access point. Additionally, the repeater access point is communicating with the clie

28 MAC Filter Mode: In Accept mode, WIRELESS ROUTER only accepts clients with MAC address in the list. In Reject mode, WIRELESS ROUTER will reject cl

2Copyright 2009 All Rights Reserved. No part of this document can be copied or reproduced in any form without written consent from the company. Trad

29 3.2.6 Professional Wireless Professional Setting allows you to set up additional parameters for wireless. But default values are recommended.

30 Enable Radio?: Select [Yes] to enable Radio function. Date to Enable Radio: This field defines the dates that wireless function is enabled. Time o

31incoming messages (ranging from 256 to 2346 bytes) used as fragmentation boundary. If the frame size is too big, the heavy interference affects tra

32192.168.1.1. Subnet Mask: The LAN subnet mask of WIRELESS ROUTER. The Default value is 255.255.255.0 3.3.2 DHCP WIRELESS ROUTER supports up to 25

33Enable the DHCP Server?: DHCP server administers and assigns IP addresses for LAN clients automatically. WIRELESS ROUTER's Domain Name: The Do

34 Network/Host IP: It stands for the destination network or host of a route rule. So it could be a host address, such as 「192.168.123.11」 or a netwo

35fields differ depending on the connection type you selected. WAN Connection Type: WIRELESS ROUTER supports 5 methods of obtaining the WAN IP Addre

36contact between WIRELESS ROUTER and the remote network or host. Connect to DNS Server automatically: This field allows you to get the DNS IP addres

37MAC address: This field allows you to provide a unique MAC address for WIRELESS ROUTER to connect Internet. It is usually requested by your ISP. 3

38accessible to the outside users, you should specify a local IP address to the server. Then, add the IP address and network protocol type, port numb

3Table of Contents 1. Introduction ... 5 1.1 Features ...

39 IP Address of Exposed Station: Enter the IP address of a particular host in your LAN that will receive all the packets originally going to the WAN

40 Enable the DDNS Client: Enable/Disable the DDNS server. Default setting is Disable. Server: AP Router supports type: DynDns.org. User Name or E-ma

41 [General] Enable Web Access from WAN?: This feature allows you to configure WIRELESS ROUTER from the Internet. If you are under Home Gateway mode,

42connect to their corporate intranets or extranets. 3.5.2 URL Filter To specify keyword, URL filter will block specific URL access from clients.

43 MAC Filter Mode: In Accept mode, WIRELESS ROUTER only accepts clients with MAC address in the list. In Reject mode, WIRELESS ROUTER will reject cl

44 Enable LAN to WAN Filter?: Select [Yes] to enable filter that specify IP or port for control incoming and outgoing packets. Date to Enable LAN to

45 3.6 Administration Configure the system and upgrade the firmware of WIRELESS ROUTER. 3.6.1 Status This page is to view the Wireless system stat

46 3.6.2 System This section allows you to change system’s Password and Remote server’s information. Remote Log Server: This field allows assignin

47 3.6.3 Firmware Upgrade Follow instructions listed below: 1. Check if any new version of firmware is available on website. 2. Download a pro

48 3.6.4 Restore/Save/Upload This function allows you to save current settings of WIRELESS ROUTER to a file, or load settings from a file. Fact

4 3.4.3 Virtual Server... 37 3.4.4 DMZ ...

49 3.7.1 General The log file keeps a running log of events and activities occurring on the device. The log always displays recent logs. When the d

50 3.7.3 DHCP Lease This page displays the DHCP leases log, such as Hose Name, MAC Address, IP address, and Expires In information. 3.7.4 Wireles

51 Radio Control: To enable wireless radio or disable. 3.7.5 Routing Table A routing table contains the information necessary to forward a packet al

52 Destination: The IP address of the packet’s final destination. The destination can be an IP address or a class-based, sub-netted, or super-netted

53 3.7.7 WAN Status & Log This section shows Router’s WAN Status (Upload/Download Status) and Log chart.

54 3.7.8 CPU Status & Log This section shows Router’s CPU Status (current/Maximum/Average status) and Log chart.

553.7.9 NAT Status & Log This section shows Router’s CPU Status (current/Maximum/Average status) and Log chart.

51. Introduction This Wireless Broadband Router is a draft 802.11n compliant device that provide faster and farther range than 802.11g while backwa

6 1.2 Package Contents ‧ One Wireless AP Router with 1 antennas ‧ One External Power Adapter ‧ One CD-ROM (user’s manual) ‧ One RJ-45 Etherne

7 Back Panel Connectors Button/Port Description Reset Reset configurations to default. You would use the reset button only when a program error ha

8 2. PC Configuration To communicate and configure 802.11n AP router, the PC on your LAN must install TCP/IP protocol. Make sure the TCP/IP protocol